How it works

Three ways to charge. One dependable system.

Reserve, book a home check and get your system installed. Then your modules charge from the home grid and battery swaps, with optional solar.

A YOFE dock wired to an essential loads distribution board

Get your system installed

After your home check, a qualified installer connects your dock to the circuits you want to keep on.

Home check firstWe confirm what you want to keep on and which system fits.
Dedicated hardwired connectionThe dock gets its own protected supply path into your home.
Interlocked changeoverSwitches your essential circuits safely between grid and battery.
Qualified designWiring, protection and earthing are designed by a qualified electrical designer.

A Swap Family dock powering a home office

Power your home

Charged modules slot into the dock and run your lights, fans, TV, router and selected sockets.

Swappable 2 kWh modulesEach module docks in its own bay.
Charge at a glanceThe dock display shows how much power you have left.
Powers your chosen circuitsThe dock feeds the circuits agreed at your home check.
Room to growAdd an expansion cabinet for more modules.

A home with roof panels charging two YOFE docks

Charge three ways

Your system uses whichever source is available, so you swap only when you need to.

Solar (optional)A foldable panel for Swap Compact and Swap Family, a roof panel for Swap Plus and Swap Max.
Home gridThe dock recharges through its AC input whenever grid power is on.
Battery swapExchange a depleted module for a fully charged one.
No roof access?Your system runs on grid charging and swaps.

Three ways to charge

Solar, home grid and swap, side by side.

Solar

How it charges: An optional foldable panel (Swap Compact, Swap Family) or roof panel (Swap Plus, Swap Max).
Works best: On sunny days.
You need: Space on a roof, balcony or yard.

The AC charging input on the back of a YOFE dock

Home grid

How it charges: Through the dock's AC input when grid power is on.
Works best: Whenever the grid is available.
You need: A grid supply, connected at installation.

A customer exchanging a YOFE battery module

Swap

How it charges: Exchange a depleted module for a charged one.
Works best: In long outages and on cloudy days.
You need: Nothing extra.

FAQ

Questions, answered.

What is a YOFE Swap system?

A home dock powered by swappable 2 kWh battery modules. The modules charge from the home grid and by swapping them for charged ones, and from an optional solar panel.

How do the three ways of charging work?

Solar panels top up your modules during the day, the dock recharges from the grid whenever it's on, and when both fall short you swap a depleted module for a charged one.

Do I need solar panels?

No. Solar is optional with every system. Without a roof or balcony, your system runs on grid charging and swaps.

Can I use YOFE in a mall or plaza unit?

Yes. Units without roof access run on grid charging and swaps.

Which system do I need?

It depends on what you want to keep on. Try the power planner for an estimate; we confirm it at your home check.

How much does it cost?

We share pricing at your home check or on WhatsApp, once we know which system fits.

Is reserving free?

Yes. Reserving is free and there is no payment on this website.

How is it installed?

A qualified installer connects the dock to your essential circuits through a dedicated connection and an interlocked changeover.

Can I add more storage later?

Yes. Each system takes an expansion cabinet: 2 extra modules for Swap Compact, 4 for Swap Family, 6 for Swap Plus and 9 for Swap Max.

Where is YOFE available?

We're starting in Sangotedo and nearby estates, with early access for the first reservations.

See which system fits your home.

Reserving is free. We'll follow up on WhatsApp and book your home check.

Reserve your spot See systems